Email : info@phmtools.com
REBAR FAST SAWING MACHINE
Adopts oversized round columns for the maximum amount of support to the saw frame. The rigid dual columns with large diameters guide the saw frame for a more powerful, smooth, and accurate cutting. Cutting force and feed rate are applied evenly from top to bottom of the cut.
REBAR FAST SAWING MACHINE PARAMETER
| Cutting range | 400*380mm | Hacksaw size | 4320*34*11mm |
| Saw blade linear speed | 26, 45, 55, 72m/min | Feedrate | Hydraulic speed regulation |
| Feeding method | Manual feed/roller assist | Clamping system | Hydraulic clamping |
| main motor power | 4KW-4P | Hydraulic motor power | 0.75KW |
| Cooling pump power | 0.04KW | Oil pump motor | 1.1KW |
| Hydraulic oil tank volume | 70L | Coolant volume | 60L |
| Table height | 650MM | weight | 1300KG |
| aspect | 2250*1100*1550mm |
● Material feed in by auto, feeding length measured by liner scale, feeding tolerance within 0.2mm. Can do OEM as customers requests.
●Suits cutting variety small-sized material
● Hydraulic front and rear vice jaws clamp both side of materials
● Hydraulic upper clamp for bundles
● Carbide blade guides and bearing provides additional blade support
REBAR FAST SAWING MACHINE DETAILS
According to the construction requirements for the flatness of the steel section,
more and more construction sites began to use sawing machines,
with higher work efficiency, one bundle at a time, one bundle for 6- 10 minutes!
CONTACT PHMTOOLS
- We also specialize in manufacturing Manual bending machine and cutting machine You just need to contact us.
- Thanks for your interest in Products. We are committed to providing you the good quality products you expected.
- Please contact our representative for more informations or leave the message with your company information in the comments section.
- We will put a high value on your comments! Please contact us by the email below if you have any questions or comments.